Subaru Impreza 2002 Service Manual page 3696

6. Stop and Brake Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from stop and brake
switch, and then remove the switch. <Ref. to BR-
69, REMOVAL, Stop Light Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the brake switch (A) and stop light switch
(B) resistance.
Switch Pedal
Released
Brake
Depressed
Released
Stop light
Depressed
If NG, replace the stop and brake switch.
STOP AND BRAKE SWITCH
B6M1564B
Terminal No. Standard
Less than 1 Ω
1 and 4
More than 1 M Ω
1 and 4
More than 1 M Ω
2 and 3
Less than 1 Ω
2 and 3
CC-7
CRUISE CONTROL SYSTEM