Subaru Impreza 2002 Service Manual page 3186

7. Blower Motor Unit Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box. <Ref. to EI-38, REMOV-
AL, Glove Box.>
3) Loosen the nut to remove the support beam
stay.
4) Disconnect the blower motor connector.
5) Disconnect the power transistor connector.
BLOWER MOTOR UNIT ASSEMBLY
HV0006
HV0014
HV0009
AC-27
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
6) Loosen the bolt and nut to remove blower motor
unit assembly.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to COMPONENT in General Descrip-
tion. <Ref. to AC-5, HEATER COOLING UNIT,
COMPONENT, General Description.> and
<Ref. to AC-7, BLOWER MOTOR UNIT,
COMPONENT, General Description.>
C: INSPECTION
Connect the motor connector terminal 1 from the
battery to the positive (+) lead and terminal 2 to the
negative (−) lead. Make sure the motor runs
smoothly.
HV0013
B4M2404