Subaru Impreza 2002 Service Manual page 3188

9. Blower Resistor (Manual A/C
Model)
A: REMOVAL
1) Remove the glove box. <Ref. to EI-38, REMOV-
AL, Glove Box.>
2) Disconnect the blower resistor connector.
3) Loosen the two screws to remove blower resis-
tor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
(4)
Measure the blower resistor resistance.
Terminal No.
3 and 1
3 and 2
3 and 4
If NG, replace the blower resistor.
BLOWER RESISTOR (MANUAL A/C MODEL)
HV0009
(1)
(2)
(3)
HV0057
Standard
Approx. 0.51 Ω
Approx. 2.70 Ω
Approx. 1.43 Ω
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
AC-29