Subaru Impreza 2002 Service Manual page 3659

EXTERIOR/INTERIOR TRIM
20.Rear Quarter Trim
A: REMOVAL
1. SEDAN
1) Remove the rear seat. <Ref. to SE-11, REMOV-
AL, Rear Seat.>
2) Remove the side sill rear cover. <Ref. to EI-45,
REMOVAL, Lower Inner Trim.>
3) Remove the rear pillar lower cover (A).
4) Remove the seatbelt lower anchor bolt, and then
remove the rear pillar upper trim (B).
Clip
2. WAGON
1) Remove the rear seat. <Ref. to SE-11, REMOV-
AL, Rear Seat.>
2) Remove the side sill rear cover.
3) Remove the rear rail trim (A).
4) Loosen the screws and clips to remove rear
quarter upper trim (B).
5) Remove the rear skirt trim (C).
6) Loosen the bolts and clips to remove rear quar-
ter lower trim (D).
Clip
REAR QUARTER TRIM
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to securely hook pawls of inner trim
panel to body flange.
NOTE:
When installing the rear quarter upper trim, be sure
to set the rear mole as shown in the figure.
BO0076
BO0077
EI-46
B5M0673A