Subaru Impreza 2002 Service Manual page 3587

CLEAR MEMORY MODE
IMMOBILIZER (DIAGNOSTICS)
7. Clear Memory Mode
A: OPERATION
1) On the «Main Menu» display screen, select the {2. Each System Check}, and then press the [YES] key.
2) On the «System Selection Menu» display screen, select the {Engine Control System}, and then press the
[YES] key.
3) Press the [YES] key after displayed information of engine type.
4) On the «Engine Diagnosis» display screen, select the {Clear Memory}, and then press the [YES] key.
5) When the `Done' and `Turn Ignition Switch OFF' are shown on the display screen, turn the Subaru Select
Monitor and ignition switch to OFF.
NOTE:
• After the memory has been cleared, the ISC must be initialized. To do this, turn the ignition switch to ON
position. Wait 3 seconds before starting the engine.
• For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
IM-10