Subaru Impreza 2002 Service Manual page 3707

Hide thumbs Also See for Impreza 2002:
Table of Contents

Advertisement

CRUISE CONTROL SYSTEM (DIAGNOSTICS)
4. Cruise Control Module I/O Signal
A: ELECTRICAL SPECIFICATION
Content
Main light
Inhibitor switch (AT)
Motor B
Ground
Motor A
RESUME/ACCEL switch
SET/COAST switch
Main power supply
Ignition switch
Motor C
Motor clutch
Cruise control main switch
CRUISE CONTROL MODULE I/O SIGNAL
Terminal No.
Measuring conditions and I/O signals (ignition switch ON and engine idling)
1
• Battery voltage is present when main switch is turned OFF.
• "0" volt is present when main switch is turned ON.
4
• Battery voltage is present when selector lever is other than "P" or "N" position.
• "0" volt is present when selector lever is set to "P" or "N" position.
5
• ON-and-OFF ("0"-and-battery voltage) operation is alternately repeated while
cruise control is operating.
• "0" volt is present when main switch is turned OFF.
6
7
• ON-and-OFF ("0"-and-battery voltage) operation is alternately repeated while
cruise control is operating.
• "0" volt is present when main switch is turned OFF.
9
• Battery voltage is present when command switch is turned to RESUME/ACCEL
position.
• "0" volt is present when command switch is released.
10
• Battery voltage is present when command switch is turned to SET/COAST
position.
• "0" volt is present when command switch is released.
11
• Battery voltage is present when main power is turned ON.
• "0" volt is present when main power is turned OFF.
12
• Battery voltage is present when ignition switch is turned ON.
• "0" volt is present when ignition switch is turned OFF.
13
• ON-and-OFF ("0"-and-battery voltage) operation is alternately repeated while
cruise control is operating.
• "0" volt is present when main switch is turned OFF.
14
• ON-and-OFF ("0"-and-battery voltage) operation is alternately repeated while
cruise control is operating.
• "0" volt is present when vehicle is stopped.
15
• Battery voltage is present during pressing the cruise control main switch.
• "0" volt is present when main switch is turned OFF.
10
8
9
20 19 18 17 16 15 14 13 12 11
CC-8
5
4
3
2
7
6
1
B6M1628

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents