Subaru Impreza 2002 Service Manual page 3255

AIRBAG SYSTEM
• Do not drop the airbag modulator parts, subject
them to high temperature over 93°C (199°F), or let
water, oil, or grease get on them; otherwise, the in-
ternal parts may be damaged and reliability greatly
lowered.
• If any damage, opening, or rust is found on the
airbag system wire harness, do not attempt to re-
pair using soldering equipment. Be sure to replace
the faulty harness with a new genuine part.
GENERAL DESCRIPTION
• Install the wire harness securely with the speci-
fied clips to avoid interference or tangled up with
other parts.
• Do not allow water or oil to come in contact with
the connector terminals. Do not touch the connec-
tor terminals.
G5M0295
• Either of the airbag modules for driver, passen-
ger or side, or pretensioner must not be disassem-
bled.
G5M0296
AB-4
G5M0297
G5M0298
G5M0299