Subaru Impreza 2002 Service Manual page 3477

Hide thumbs Also See for Impreza 2002:

Table of Contents

GLASS/WINDOWS/MIRRORS

14.Rear Window Glass

1) Disconnect the electrical connectors from rear

defogger terminals.

2) Remove the glass in the same procedure as for

windshield glass. <Ref. to GW-26, REMOVAL,

Windshield Glass.>

B: INSTALLATION

1) Bond the dam rubber and matching pin.

Matching pin

Unit: mm (in)

2) Install the glass in the same procedure as for

windshield glass. <Ref. to GW-27, INSTALLA-

TION, Windshield Glass.>

3) Connect the rear defogger terminals.

• When the door is opened/closed after glass is

bonded, always lower the door glass and then

open/close door carefully.

• Move the vehicle slowly.

4) After completion of all work, allow the vehicle to

stand for about 24 hours.

For minimum drying time and time the vehicle must

be left standing before driving after bonding, follow

instructions or instruction manual from the adhe-

sive manufacturer.

REAR WINDOW GLASS

14.5 (0.571)

5) After curing of adhesive, pour water on external

surface of vehicle to check that there are no water

When a vehicle is returned to the user, tell him

or her that the vehicle should not be subjected

to heavy impact for at least three days.

Show Quick Links

Chapters

Table of Contents