Subaru Impreza 2002 Service Manual page 3370

B: INSTALLATION
1. OUTER BELT (FRONT)
Install in the reverse order of removal.
CAUTION:
• The parts on right and left are not identical.
Before installation, make sure that the correct
part is used.
• Be careful not to twist the belts during instal-
lation.
2. INNER BELT (FRONT)
Install in the reverse order of removal.
FRONT SEAT BELT
C: INSPECTION
1. OUTER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
• Pretensioner is cracked or deformed.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. INNER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
SB-9
SEAT BELT SYSTEM