Subaru Impreza 2002 Service Manual page 3125

POWER ASSISTED SYSTEM (POWER STEERING)
6) Non-turbo MODEL:
(1) Remove the air intake duct. <Ref. to IN-7,
REMOVAL, Air Intake Duct.>
(2) Remove the bolt A.
(3) Disconnect the pipe C from oil pump. Dis-
connect the pipe D from return hose.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Bolt A
(2) Pipe C
(3) Pipe D
PIPE ASSEMBLY [RHD MODEL]
ST0011
PS-82
7) Turbo MODEL:
(1) Remove the air intake duct, air cleaner up-
per cover and air intake boot.
<Ref. to IN(TURBO)-8, REMOVAL, Air Intake
Duct.> and <Ref. to IN(TURBO)-7, REMOVAL,
Air Cleaner.>
(2) Remove the two bolts fixing pipe C and D.
(3) Remove the coolant filler tank.
(4) Disconnect the pipe C from oil pump. Dis-
connect pipe D from return hose.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Pipe C
(2) Pipe D
EN0126
ST0012