Subaru Impreza 2002 Service Manual page 3332

Hide thumbs Also See for Impreza 2002:
Table of Contents

Advertisement

Step
1
CHECK AIRBAG CONTROL MODULE.
1)Turn the ignition switch to OFF, disconnect
the battery ground cable, and wait more than
20 seconds.
2)Disconnect the connector (AB6) from airbag
control module. <Ref. to AB-15, Airbag Control
Module.>
3)Connect the connector (1I) in test harness I
or I2 to connector (AB6).
4)Connect the battery ground cable, and turn
the ignition switch to ON.
5)Measure the voltage between the connector
(2I) in test harness I or I2 and the chassis
ground.
Connector & terminal
(2I) No. 6 (+) — Chassis ground ( − − − − ):
2
CHECK AIRBAG MAIN HARNESS.
1) While checking control module, turn the igni-
tion switch to OFF and disconnect the battery
ground cable. Wait more than 20 seconds
before operation.
2)Disconnect the airbag connector (AB1) from
the body harness (B31).
3)Connect the connector (2M) in test harness
M to the airbag connector (AB1).
4)Measure the resistance between the con-
nector (5M) in test harness M and the connec-
tor (2I) in test harness I or I2.
Connector & terminal
LHD MODEL:
(5M) No. 2 — (2I) No. 6:
RHD MODEL:
(5M) No. 1 — (2I) No. 6:
3
CHECK AIRBAG MAIN HARNESS.
Measure the following resistance with the
above-metioned condition maintained.
Connector & terminal
LHD MODEL:
(5M) No. 2 — Chassis ground:
(2I) No. 6 — Chassis ground:
RHD MODEL:
(5M) No. 1 — Chassis ground:
(2I) No. 6 — Chassis ground:
4
CHECK FUSE NO. 6 (IN JOINT BOX).
1)Confirm that the ignition switch is turned
OFF.
2)Remove the No. 6 fuse (in joint box) and per-
form visual inspection.
DIAGNOSTIC CHART WITH TROUBLE CODE
Check
Is the voltage more than 10 V? Replace the airbag
Is the resistance less than 10
Ω?
Is the resistance more than 1
MΩ?
Is the fuse No. 6 blown?
AB-53
AIRBAG SYSTEM (DIAGNOSTICS)
Yes
Go to step 2.
control module.
<Ref. to AB-15,
Airbag Control
Module.>
Go to step 3.
Replace the body
harness with air-
bag main harness.
Go to step 4.
Replace the body
harness with air-
bag main harness.
Replace the fuse
Repair the body
No. 6. If fuse No. 6
harness.
is blown again,
repair the body
harness.
No

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents