Subaru Impreza 2002 Service Manual page 3657

EXTERIOR/INTERIOR TRIM
18.Upper Inner Trim
A: REMOVAL
1) Remove the lower inner trim. <Ref. to EI-45, RE-
MOVAL, Lower Inner Trim.>
2) Remove the front mole (A).
3) Remove the front pillar upper trim (B).
4) Detach the front seat belt shoulder anchor, then
remove the center pillar upper trim (C).
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to securely hook pawls of inner trim
panel to body flange.
NOTE:
When installing the center pillar upper trim and
front pillar upper trim, be sure to set the front mole
as shown in the figure.
UPPER INNER TRIM
B5M1021A
B5M0673A
EI-44