Subaru Impreza 2002 Service Manual page 3148

10.Reservoir Tank
A: REMOVAL
1. NON-TURBO MODEL
1) Remove the air intake duct. <Ref. to IN-7, RE-
MOVAL, Air Intake Duct.>
2) Drain fluid from the reservoir tank.
3) Disconnect the pipe D from return hose and suc-
tion hose from oil pump.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Suction hose
(2) Pipe D
(3) Return hose
4) Remove the reservoir tank from bracket by pull-
ing it upwards.
2. TURBO MODEL
1) Remove the air intake duct. <Ref. to IN(TUR-
BO)-9, REMOVAL, Intake Duct.>
2) Drain fluid from the reservoir tank.
RESERVOIR TANK
POWER ASSISTED SYSTEM (POWER STEERING)
3) Disconnect the return hose and suction hose
from reservoir tank.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose, cover the open ends of them with a clean
cloth.
4) Remove the reservoir tank from bracket by pull-
ing it upwards.
ST0021 B: INSTALLATION
1. NON-TURBO MODEL
1) Install the reservoir tank to bracket.
2) Connect the pipes D to return hose and suction
hose to oil pump.
3) Feed the specified power steering fluid. <Ref. to
PS-107, Power Steering Fluid.>
PS-105
(1) Suction hose
(2) Pipe D
(3) Return hose
(1) Suction hose
(2) Pipe D
(3) Return hose
ST0022
ST0021