Subaru Impreza 2002 Service Manual page 3561

REAR INNER REMOTE
SECURITY AND LOCKS
8. Rear Inner Remote
A: REMOVAL
1) Remove the rear door trim. <Ref. to EI-37, RE-
MOVAL, Rear Door Trim.>
2) Remove the sealing cover. <Ref. to EB-17, RE-
MOVAL, Rear Sealing Cover.>
3) Remove the screw and two rod joints.
4) Remove the inner remote.
BO0108
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the inner remote works properly after in-
stallation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
3) Make sure the child safety lock on rear doors
work properly, when applicable.
SL-22