Subaru Impreza 2002 Service Manual page 3494

DATUM DIMENSIONS
BODY STRUCTURE
3. Datum Dimensions
A: MEASUREMENT
Refer to LOCATION for details on measurement
points. <Ref. to BS-3, LOCATION, Datum Points.>
NOTE:
• Using a tram tracking gauge, measure all the di-
mensions.
• When using a tape measure, carefully measure
dimensions without letting the tape measure sag or
twist.
• Measure the linear dimensions between cores of
holes.
• Suffixes "RH" and "LH" indicate right-hand and
left-hand.
G5M0122
• Measure at the center of the circle around the
outside of the body panel.
B5M1133A
BS-11