Subaru Impreza 2002 Service Manual page 3438

Hide thumbs Also See for Impreza 2002:

Table of Contents

A: INSPECTION

Measure the resistance between antenna terminal

and each antenna wire.

If an antenna wire is OK, resistance will be less

than 1 W. If an antenna wire is broken, the resis-

tance will be more than 1 MW.

When checking the continuity, wind a piece of tin

foil around the tip of tester probe and press foil

against wire with your finger.

To locate the broken point, move the probe along

antenna wire.

1) Clean the antenna wire and surrounding area

with a cloth dampened by alcohol.

2) Paste a thin masking film on the glass along bro-

3) Deposit conductive silver composition (DU-

PONT NO. 4817) on the broken portion with a

drawing pen.

4) Dry out the deposited portion.

5) After repair has been completed, measure the

resistance in repaired wire.

ENTERTAINMENT

Show Quick Links

Chapters

Table of Contents