Subaru Impreza 2002 Service Manual page 3112

2. SERVICE LIMIT
Make a measurement as follows. If it exceeds the
specified service limit, adjust or replace.
NOTE:
When making a measurement, vise gearbox by us-
ing ST. Never vise the gearbox by inserting alumi-
num plates, etc. between vise and gearbox.
ST 926200000 STAND
Sliding resistance of rack shaft:
Service limit
304 N (31 kgf, 68 lb) or less
STEERING GEARBOX [RHD MODEL]
G4M0109
G4M0110
PS-69
POWER ASSISTED SYSTEM (POWER STEERING)
3. RACK SHAFT PLAY IN RADIAL DIREC-
TION
Left-turn steering:
Service limit
0.19 mm (0.0075 in) or less
On condition
L: 5 mm (0.20 in)
P: 98 N (10 kgf, 22 lb)
Right-turn steering:
Service limit
Direction
0.3 mm (0.012 in) or less
Direction
0.19 mm (0.0075 in) or less
G4M0111
G4M0112