LIGHTING SYSTEM
25.Spot Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and spot light mounting
screw (B).
3) Disconnect the harness connectors and remove
the spot light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. SPOT LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. SPOT LIGHT SWITCH
Measure the spot light resistance.
Switch position
Terminal No.
OFF
ON
1 and 2
SPOT LIGHT
BO0045
BO0046
Standard
—
More than 1MΩ
18 ± 5.4Ω
LI-28