Subaru Impreza 2002 Service Manual page 3379

LIGHTING SYSTEM
1. General Description
A: SPECIFICATIONS
Headlight
Front turn signal light
Side turn signal light
Parking light
Front fog light
Rear fog light
Rear combination light
License plate light
High-mounted stop light
Room light
Spot light
Luggage room light
Trunk room light
Glove box light
B: PRECAUTIONS
• Before disassembling or reassembling parts, al-
ways disconnect the battery ground cable. When
replacing radio, control module, and other parts
provided with memory functions, record memory
contents before disconnecting the battery ground
cable. Otherwise, the memory will be erased.
• Reassemble in reverse order of disassembly, un-
less otherwise indicated.
• Adjust parts to the given specifications.
• Connect the connectors and hoses securely dur-
ing reassembly.
C: PREPARATION TOOL
1. GENERAL TOOLS
TOOL NAME
Circuit Tester
GENERAL DESCRIPTION
Tail/Stop light
Turn signal light
Back-up light
Standard type
Sedan
Rear spoiler built-in type
Wagon
12 V — 55 W/60 W (Halogen)
• After reassembly, make sure functional parts op-
erate smoothly.
WARNING:
• Airbag system wiring harness is routed near
electrical parts and switches. All airbag system
wiring harnesses and connectors are yellow.
Do not use electric test equipment on these cir-
cuits.
• Be careful not to damage the airbag system
wiring harness when servicing electrical parts
and switches.
Used for measuring resistance and voltage.
LI-2
12 V — 21 W
12 V — 5 W
12 V — 5 W
12 V — 55 W
12 V — 21 W
12 V — 5/21 W
12 V — 21 W
12 V — 21 W
12 V — 5 W
12 V — 21 W
12 V — 1.2 W
12 V — 10 W
12 V — 8 W
12 V — 8 W
12 V — 13 W
12 V — 5 W
12 V — 1.4 W
REMARKS