Subaru Impreza 2002 Service Manual page 3406

26.Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and room light mounting
screws (B).
3) Disconnect the harness connectors and remove
the light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. ROOM LIGHT SWITCH
Measure the room light resistance.
Switch position Terminal No.
OFF
ON 1 and 3
DOOR 1 and 2
ROOM LIGHT
B6M1479A
B6M1489A
Standard
— More than 1MΩ
1.5 ± 0.5Ω
1.5 ± 0.5Ω
LI-29
LIGHTING SYSTEM