18) Using the ST1 and ST2, repair the cylinder's
clinched sections.
ST1 34099FA080 PUNCH
ST2 34099FA070 BASE
(1) Cylinder
19) If the cylinder edge is deformed in a convex
shape, repair using an oil stone.
STEERING GEARBOX [RHD MODEL]
S4M0412A
G4M0889
PS-59
POWER ASSISTED SYSTEM (POWER STEERING)
20) Remove the oil seal using ST and press from
plug.
ST 34199AE100 PLUG OIL SEAL REMOVER
CAUTION:
Do not apply force on the plug edge surface.
Replace the plug circumference O-rings with
new ones.
(1) Oil seal
(2) O-ring
21) Set the ST on drawing dimension.
ST 34199AE120 GEARBOX OIL SEAL RE-
MOVER
(1) 70 mm (2.76 in)
B4M2604A
B4M2605A