Subaru Impreza 2002 Service Manual page 3335

AIRBAG SYSTEM (DIAGNOSTICS)
Step
7 CHECK FRONT SUB-SENSOR HARNESS
(RH).
1)Connect the connector (2F) in test harness F
to the connector (AB15).
2)Measure the resistance between connector
(3H) in test harness H and connector (3F) in
the test harness F.
Connector & terminal
(3F) No. 5 — (3H) No. 5:
(3F) No. 6 — (3H) No. 6:
8 CHECK FRONT SUB-SENSOR HARNESS
(RH).
Measure the resistance between connector
(3F) in test harness F and the chassis ground.
Connector & terminal
(3F) No. 5 — Chassis ground:
(3F) No. 6 — Chassis ground:
9 CHECK FRONT SUB-SENSOR (RH).
1)Connect the connector (2H) in test harness
H to front sub-sensor (RH).
2)Measure the resistance of the connector
(3H) in test harness H.
Connector & terminal
(3H) No. 3 — No. 4:
10 CHECK FRONT SUB-SENSOR (RH).
Measure the resistance between connector
(3H) in test harness H and the chassis ground.
Connector & terminal
(3H) No. 3 — Chassis ground:
(3H) No. 4 — Chassis ground:
DIAGNOSTIC CHART WITH TROUBLE CODE
Check
Is the resistance less than 10
Ω?
Is the resistance more than 1
MΩ?
Is the resistance between 750
Ω and 1 KΩ?
Is the resistance more than 1
MΩ?
AB-56
Yes
Go to step 8. Replace the body
harness with front
sub-sensor har-
ness (RH).
Go to step 9. Replace the body
harness with front
sub-sensor har-
ness (RH).
Go to step 10. Replace the front
sub-sensor (RH).
<Ref. to AB-18,
Front Sub Sen-
sor.>
Finish the diagno- Replace the front
sis. sub-sensor (RH).
<Ref. to AB-18,
Front Sub Sen-
sor.>
No