Suzuki GA413 Service Manual page 70

1B-16 AIR CONDITIONING
1. Front head
2. Cylinder shaft
3. Cylinder
4. Case
5. O-ring
1. Front head
2. Bearing puller
1. Lip type seal
2. Front head
1. Front head
2. O-ring
11) Remove front head by pushing cylinder shaft.
NOTE:
Be careful not to remove cylinder from case.
12) Remove O-ring.
13) Remove lip seal from front head.
ASSEMBLY
1) Press-fit lip seal into front head using special tool (D).
Special Tool
(D): 09991-06050
CAUTION:
Do not reuse mechanical seal once removed from
compressor.
2) Coat special tool (E) surface with oil and place it on the shaft.
Special Tool
(E): 09991-06040
3) Install O-ring to case.
4) Apply A/C oil to lip seal and O-ring.
5) Install front head assembly.