Installing Discharge Shield - No Conditioner - MacDon R113 Unloading And Assembly Instructions

4.3.2 Installing Discharge Shield – No Conditioner
Discharge shields may need to be removed for machine service, but a rotary disc header without a conditioner should NOT
be operated without the discharge shield.
1. Position shield (A) until pins (B) (one on each side) engage
the slots in support (C) and the bolt holes in shield (A) align
with holes (D) in the header.
2. Secure shield (B) to the header with four M16 hex head
bolts (A), nuts, and flat washers.
3. Ensure the bolt heads face inboard and torque the nuts to
261 Nm (193 lbf·ft).
262300
CHANGING CONDITIONER
Figure 4.36: Left Side of Header – Right Opposite
Figure 4.37: Left Side of Header – Right Opposite
34
D
B
C
A
D
A
A
B
Revision A