Exhalation System; Putting On The Mask; Humidifier - Weinmann homecare SOMNOsoft + WM 24600 Description And Operating Instructions

4.2 Exhalation system

13

4.3 Putting on the mask

1. Adjust the forehead pad of the mask (if it has one).
2. Attach the cap or headstraps to the mask.
3. Put the mask on.
4. To avoid pressure sores on the face, adjust the cap or headstraps so that the rim of the
mask only exerts slight pressure on the face.
For further details of the procedure, consult the operating instructions for the individual
mask.

4.4 Humidifier

The coupling on the end of the corrugated hose has a di-
ameter of 19.5 mm and fits on a 22 mm standard conical
connection. Push the coupling onto the exhalation system.
The exhalation system enables you to breathe through
your nose or mouth if the device should fail. Full facial
masks must also be equipped with a safety valve. Remove
the mask as soon as possible. Check whether there is a
power failure. Consult the operating instructions for your
exhalation system
13
If you use a humidifier
SOMNOsoft + and the hose system
1
tion stub and the electrical connection of the heating ele-
ment must face towards the SOMNOsoft +. Also observe
the operating instructions supplied.
.
, this is inserted between the
34
12
Preparing for use
. The inlet connec-
11