Exhalation System; Fitting Mask - Weinmann SOMNOsmart 2 Description And Instructions For Use

3.2 Exhalation system

13

3.3 Fitting mask

The sleeve at the end of the creased hose has a
diameter of 19.5 mm and fits over a 22 mm standard
cone. Place the sleeve on the exhalation system.
The exhalation system allows you to breathe through
the nose or mouth if the unit malfunctions. Full facial
masks must also be equipped with a safety valve. Re-
move the mask as soon as possible. First check wheth-
er a power failure has occurred. Please observe the
operating instructions for your exhalation system
1. Adjust the forehead support of the mask
(if provided).
2. Connect the headgear to the mask.
3. Position the mask.
4. Adjust the headgear so that the bulge of the mask
only results in low pressure to prevent causing pres-
sure points on the face.
Please refer to the operating instructions for the relevant
mask for further procedure.
Setup of Equipment
.
13
15
EN