Configuring Ipv6 Bgp Community - HPE FlexNetwork HSR6800 Configuration Manual

Step
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Create an EBGP peer group.
4.
Configure the AS number for
5.
the peer group.
Add an IPv6 peer into the
6.
peer group.
NOTE:
• To create a pure EBGP peer group, you must specify an AS number for the peer group.
• If a peer was added into an EBGP peer group, you cannot specify any AS number for the peer
group.
Creating a mixed EBGP peer group
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Create an EBGP peer group.
4.
Specify the AS number of an
5.
IPv6 peer.
Add the IPv6 peer into the
6.
peer group.
NOTE:
When creating a mixed EBGP peer group, you must create a peer and specify its AS number, which
can be different from AS numbers of other peers; however, you cannot specify an AS number for the
EBGP peer group.

Configuring IPv6 BGP community

Advertising community attribute to an IPv6 peer or peer group
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Advertise community
4.
attribute to an IPv6 peer or
peer group.
Command
bgp as-number
ipv6-family
group ipv6-group-name external
peer ipv6-group-name
as-number as-number
peer ipv6-address group
ipv6-group-name
Command
system-view
bgp as-number
ipv6-family
group ipv6-group-name external
peer ipv6-address as-number
as-number
peer ipv6-address group
ipv6-group-name
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address }
advertise-community
369
Remarks
N/A
N/A
N/A
Not configured by default.
Not added by default.
Remarks
N/A
N/A
N/A
N/A
Not specified by default.
Not added by default.
Remarks
N/A
N/A
N/A
Not advertised by default.