HPE FlexNetwork HSR6800 Configuration Manual page 250

*> 8.1.1.0/24
# Display the BGP routing table on Router B.
[RouterB] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
*> 8.1.1.0/24
# Display the BGP routing table on Router C.
[RouterC] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 3.3.3.3
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
i 8.1.1.0/24
The output shows that Router A has learned no route to AS 65009, and Router C has learned
network 8.1.1.0 but the next hop 3.1.1.2 is unreachable. Therefore, the route is invalid.
Redistribute direct routes:
4.
Configure BGP to redistribute direct routes on Router B, so Router A can obtain the route to
9.1.1.0/24 and Router C can obtain the route to 3.1.1.0/24.
# Configure Router B.
[RouterB] bgp 65009
[RouterB-bgp] import-route direct
# Display the BGP routing table on Router A.
[RouterA] display bgp routing-table
Total Number of Routes: 4
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
0.0.0.0
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
3.1.1.2
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
3.1.1.2
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
NextHop
238
0
MED LocPrf
0
MED LocPrf
0 100
MED LocPrf
0 i
PrefVal Path/Ogn
0 65008i
PrefVal Path/Ogn
0 65008i
PrefVal Path/Ogn