Ipv6 Bgp Ipsec Policy Configuration - HPE FlexNetwork HSR6800 Configuration Manual

NextHop : FE80::E142:0:4607:1
PrefVal : 0
MED
Path/Ogn: ?
*> Network : 2::2
NextHop : ::1
PrefVal : 0
MED
Path/Ogn: ?
*>i Network : 3::3
NextHop : ::FFFF:3.3.3.3
PrefVal : 0
MED
Path/Ogn: ?
*>i Network : 4::4
NextHop : ::FFFF:3.3.3.3
PrefVal : 0
MED
Path/Ogn: ?
After the above configuration, you can ping through the IPv6 address 4::4 of CE 2 from CE 1.

IPv6 BGP IPsec policy configuration

Network requirements
•
In Figure
relationship. Routers B and C establish an EBGP relationship.
•
Configure IPsec policies on the routers to authenticate and encrypt protocol packets.
Figure 111 Network diagram
Configuration procedure
Configure IPv6 addresses for interfaces. (Details not shown.)
1.
Configure the IBGP connection:
2.
# Configure Router A.
<RouterA> system-view
[RouterA] ipv6
[RouterA] bgp 65008
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] ipv6-family
: 0
: 0
: 0
: 0
111, configure IPv6 BGP on the routers. Routers A and B establish an IBGP
383
LocPrf :
Label : NULL
PrefixLen : 128
LocPrf :
Label : NULL
PrefixLen : 128
LocPrf : 100
Label : NULL
PrefixLen : 128
LocPrf : 100
Label : NULL