Configuring Static Address-To-Dlci Maps; Configuring Dynamic Ipv4 Address Mapping; Configuring Dynamic Ipv6 Address Mapping; Configuring Frame Relay Subinterfaces - HPE FlexNetwork MSR series Configuration Manual

Configuring static address-to-DLCI maps

Step
1. Enter system view.
2. Enter interface view.
3. Create a static Frame Relay
address-to-DLCI map.

Configuring dynamic IPv4 address mapping

Step
1. Enter system view.
2. Enter interface view.
3. Enable Frame Relay InARP
for
mapping.
4. Set the
interval during the InARP
learning process.

Configuring dynamic IPv6 address mapping

Step
1. Enter system view.
2. Enter interface view.
3. Enable Frame Relay IND for
dynamic address mapping.
4. Set the IND request interval
during
process.
5. Set the interval between
continuous IND requests.

Configuring Frame Relay subinterfaces

Frame Relay provides main interfaces and subinterfaces. A subinterface is a logical interface. It can
be configured with protocol addresses and virtual circuits. One physical interface can include
Command
system-view
interface
interface-number
•
•
Command
system-view
interface
interface-number
dynamic address
fr inarp ip [ dlci-number ]
InARP request
fr inarp interval interval
Command
system-view
interface
interface-number
fr ipv6 ind [ dlci-number ]
the IND learning
ipv6 ind holdtime seconds
ipv6
retrans-timer seconds
interface-type
Create an
address-to-DLCI map:
fr map ip { ip-address |
default } dlci-number
Create an
address-to-DLCI map:
fr map ipv6 { ipv6-address |
default } dlci-number
interface-type
interface-type
ind solicitation
229
Remarks
N/A
The interface can be a main
interface or P2MP subinterface.
IPv4
By default, no static Frame Relay
address-to-DLCI maps exist.
When the DLCI specified in this
IPv6
command does not exist, the
DLCI is automatically created.
Remarks
N/A
N/A
By default, Frame Relay InARP is
enabled for dynamic address
mapping.
The default setting is 60 seconds.
Remarks
N/A
N/A
By default, Frame Relay IND is
disabled for dynamic address
mapping.
The default setting is 30 seconds.
The default setting is 1 second.