Bgp Load Balancing Configuration - HPE FlexNetwork HSR6800 Configuration Manual

--- 9.1.2.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 15/37/47 ms
[RouterC] ping -a 9.1.2.1 8.1.1.1
PING 8.1.1.1: 56
Reply from 8.1.1.1: bytes=56 Sequence=1 ttl=254 time=2 ms
Reply from 8.1.1.1: bytes=56 Sequence=2 ttl=254 time=2 ms
Reply from 8.1.1.1: bytes=56 Sequence=3 ttl=254 time=2 ms
Reply from 8.1.1.1: bytes=56 Sequence=4 ttl=254 time=2 ms
Reply from 8.1.1.1: bytes=56 Sequence=5 ttl=254 time=2 ms
--- 8.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/2 ms

BGP load balancing configuration

Network requirements
As shown in
Router C reside in AS 65009. EBGP runs between Router A and Router B, and between Router A
and Router C. IBGP runs between Router B and Router C. Configure two routes on Router A for load
balancing.
Figure 75 Network diagram
Configuration procedure
Configure IP addresses for interfaces. (Details not shown.)
1.
Configure BGP connections:
2.
On Router A, establish EBGP connections with Router B and Router C, respectively; configure BGP to
advertise network 8.1.1.0/24 to Router B and Router C, so Router B and Router C can access the internal
network connected to Router A.
data bytes, press CTRL_C to break
Figure 75, all routers run BGP, and Router A resides in AS 65008, and Router B and
242