HPE FlexNetwork HSR6800 Configuration Manual page 23

1.1.2.0/24
1.1.2.3/32
1.1.4.0/30
1.1.4.1/32
127.0.0.0/8
127.0.0.1/32
# Display the IP routing table of Router B.
[RouterB] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask
1.1.2.0/24
1.1.3.0/24
1.1.4.0/30
1.1.4.2/32
1.1.5.0/30
1.1.5.5/32
127.0.0.0/8
127.0.0.1/32
1.1.6.0/24
1.1.6.1/32
# Use the ping command on Host B to test the reachability of Host A (Windows XP runs on the
two hosts).
C:\Documents and Settings\Administrator>ping 1.1.2.2
Pinging 1.1.2.2 with 32 bytes of data:
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Ping statistics for 1.1.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
# Use the tracert command on Host B to test the reachability of Host A.
C:\Documents and Settings\Administrator>tracert 1.1.2.2
Tracing route to 1.1.2.2 over a maximum of 30 hops
1 <1 ms <1 ms
2 <1 ms <1 ms
3 1 ms <1 ms
Trace complete
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Routes : 10
Proto Pre Cost
Static 60 0
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
<1 ms 1.1.6.1
<1 ms 1.1.4.1
<1 ms 1.1.2.2
11
1.1.2.3 GE2/1/1
127.0.0.1 InLoop0
1.1.4.1 GE2/1/2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
NextHop Interface
1.1.4.1 GE2/1/1
1.1.5.6 GE2/1/2
1.1.4.2 GE2/1/1
127.0.0.1 InLoop0
1.1.5.5 GE2/1/2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
1.1.6.1 GE2/1/3
127.0.0.1 InLoop0