Advertising A Host Route - HPE FlexNetwork HSR6800 Configuration Manual

Step
Enter system view.
1.
Enter OSPF view.
2.
Redistribute a default
3.
route.
Configuring the default parameters for redistributed routes
Perform this task to configure default parameters cost, tag, and type for redistributed routes. Tags
indicate information related to protocols. For example, when redistributing BGP routes, OSPF uses
tags to identify AS IDs.
To configure the default parameters for redistributed routes:
Step
Enter system view.
1.
Enter OSPF view.
2.
Configure the default
3.
parameters for
redistributed routes
(cost, upper limit, tag,
and type).

Advertising a host route

Step
Enter system view.
1.
Enter OSPF view.
2.
Enter area view.
3.
Advertise a host route.
4.
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
default-route-advertise [ [ [ always |
permit-calculate-other ] | cost cost |
route-policy route-policy-name | type type ] *
| summary cost cost ]
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
default { cost cost | limit limit | tag tag | type
type } *
Command
system-view
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
area area-id
host-advertise ip-address cost
73
Remarks
N/A
N/A
Not redistributed by
default.
The
default-route-advertise
summary cost command
is applicable only to
VPNs. The PE router
advertises the default
route in a Type-3 LSA to
the CE router.
Remarks
N/A
N/A
Optional.
The default cost is 1, the
default maximum number
of routes redistributed per
time is 1000, the default
tag is 1, and default type
of redistributed routes is
Type-2.
Remarks
N/A
N/A
N/A
Not advertised by default.