Configuring An Ipv6 Anycast Address; Configuring Ipv6 Nd - HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals

Configuring automatic generation of an IPv6 link-local address for an interface
Step
1. Enter system view.
2. Enter interface view.
3. Configure the interface to
automatically generate an
IPv6 link-local address.
Manually specifying an IPv6 link-local address for an interface
Step
1. Enter system view.
2. Enter interface view.
3. Manually specify an IPv6
link-local address for the
interface.
After you configure an IPv6 global unicast address for an interface, the interface automatically
generates a link-local address. The automatically generated link-local address is the same as the
one generated by using the ipv6 address auto link-local command. If a link-local address is
manually assigned to an interface, this manual link-local address takes effect. If the manually
assigned link-local address is deleted, the automatically generated link-local address takes effect.
Using the undo ipv6 address auto link-local command on an interface only deletes the link-local
address generated by the ipv6 address auto link-local command. If the interface has an IPv6
global unicast address, it still has a link-local address. If the interface has no IPv6 global unicast
address, it has no link-local address.

Configuring an IPv6 anycast address

Step
1. Enter system view.
2. Enter interface view.
3. Configure an IPv6 anycast
address.

Configuring IPv6 ND

This section describes how to configure IPv6 ND.
Command
system-view
interface interface-type
interface-number
ipv6 address auto link-local
Command
system-view
interface interface-type
interface-number
ipv6 address ipv6-address
link-local
Command
system-view
interface interface-type
interface-number
ipv6 address { ipv6-address
prefix-length |
ipv6-address/prefix-length }
anycast
236
Remarks
N/A
N/A
By default, no link-local address is
configured on an interface.
After an IPv6 global unicast address is
configured on the interface, a link-local
address is generated automatically.
Remarks
N/A
N/A
By default, no link-local address is
configured on an interface.
Remarks
N/A
N/A
By default, no IPv6 anycast
address is configured on an
interface.