Configuring Ipv6 Is-Is Route Control - HPE FlexNetwork HSR6800 Configuration Manual

Step
Enable IPv6 for an IS-IS
7.
process on the interface.

Configuring IPv6 IS-IS route control

Before you configure IPv6 IS-IS route control, complete basic IPv6 IS-IS configuration.
For information about ACL, see ACL and QoS Configuration Guide.
For information about routing policy and IPv6 prefix list, see "Configuring routing policies."
To configure IPv6 IS-IS route control:
Step
Enter system view.
1.
Enter IS-IS view.
2.
Specify the preference for
3.
IPv6 IS-IS routes.
Configure an IPv6 IS-IS
4.
summary route.
Generate an IPv6 IS-IS
5.
default route.
Configure IPv6 IS-IS to
6.
filter incoming routes.
Configure IPv6 IS-IS to
7.
redistribute routes from
another routing protocol.
Configure the maximum
8.
number of redistributed
Level 1/Level 2 IPv6
routes.
Configure the filtering of
9.
outgoing redistributed
routes.
10. Enable route leaking.
11. Specify the maximum
number of equal-cost load
balanced routes.
Command
isis ipv6 enable [ process-id ]
Command
system-view
isis [ process-id ]
ipv6 preference { route-policy
route-policy-name | preference } *
ipv6 summary ipv6-prefix prefix-length
[ avoid-feedback | generate_null0_route |
[ level-1 | level-1-2 | level-2 ] | tag tag ] *
ipv6 default-route-advertise [ [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name ] *
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name | route-policy
route-policy-name } import
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 import-route limit number
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name | route-policy
route-policy-name } export [ protocol
[ process-id ] ]
ipv6 import-route isisv6 level-2 into
level-1 [ filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name | route-policy
route-policy-name } | tag tag ] *
ipv6 maximum load-balancing number
338
Remarks
Disabled by default.
Remarks
N/A
N/A
Optional.
15 by default.
Optional.
Not configured by
default.
Optional.
No IPv6 default route is
defined by default.
Optional.
No filtering policy is
defined by default.
Optional.
Not configured by
default.
Optional.
The default maximum
number of redistributed
Level 1/Level 2 IPv6
routes is 300000.
Optional.
Not configured by
default.
Optional.
Not enabled by default.
Optional.
The default maximum
number of equal-cost
load balanced routes is
8.