Bgp Confederation Configuration - HPE FlexNetwork HSR6800 Configuration Manual

[RouterD-bgp] peer 194.1.1.1 as-number 200
[RouterD-bgp] quit
Configure the route reflector:
3.
# Configure Router C as the route reflector.
[RouterC] bgp 200
[RouterC-bgp] peer 193.1.1.2 reflect-client
[RouterC-bgp] peer 194.1.1.2 reflect-client
[RouterC-bgp] quit
Verify the configuration:
4.
# Display the BGP routing table on Router B.
[RouterB] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 200.1.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
*> 1.0.0.0
# Display the BGP routing table on Router D.
[RouterD] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 200.1.2.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
i 1.0.0.0
Router D learned the route 1.0.0.0/8 from Router C.

BGP confederation configuration

Network requirements
As shown in
AS 65002, and AS 65003. Routers in AS 65001 are fully meshed.
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
192.1.1.1
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
193.1.1.2
Figure 79, to reduce IBGP connections in AS 200, split it into three sub-ASs: AS 65001,
i - internal, s - suppressed, S - Stale
MED LocPrf
0
i - internal, s - suppressed, S - Stale
MED LocPrf
0 100
251
PrefVal Path/Ogn
0 100i
PrefVal Path/Ogn
0 100i