Configuration Prerequisites; Configuring Ipv6 Bgp Route Redistribution; Configuring Ipv6 Bgp Route Summarization; Advertising A Default Route To An Ipv6 Peer Or Peer Group - HPE FlexNetwork HSR6800 Configuration Manual

Configuration prerequisites

Before you configure route distribution and reception control, complete the following tasks:
•
Enable IPv6.
•
Configure IPv6 BGP basic functions.

Configuring IPv6 BGP route redistribution

IMPORTANT:
If the default-route imported command is not configured, using the import-route command
cannot redistribute an IGP default route.
To configure IPv6 BGP route redistribution:
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family view or
3.
IPv6 BGP-VPN instance view.
Enable default route redistribution
4.
into the IPv6 BGP routing table.
Enable route redistribution from
5.
another routing protocol.

Configuring IPv6 BGP route summarization

To reduce the routing table size on medium and large BGP networks, configure route summarization
on BGP routers. BGP supports only manual summarization of IPv6 routes.
To configure IPv6 BGP route summarization:
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address
3.
family view.
Configure manual
4.
route summarization.

Advertising a default route to an IPv6 peer or peer group

Command
system-view
bgp as-number
ipv6-family [ vpn-instance
vpn-instance-name ]
default-route imported
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ipv6-family
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ] *
357
Remarks
N/A
N/A
N/A
Optional.
Not enabled by default.
Not enabled by default.
Remarks
N/A
N/A
N/A
Not configured by
default.