HPE FlexNetwork HSR6800 Configuration Manual page 331

[RouterA-ospfv3-1] area 1
[RouterA-ospfv3-1-area-0.0.0.1] nssa
[RouterB-ospfv3-1] quit
[RouterB] interface GigabitEthernet 2/2/0
[RouterB-GigabitEthernet2/2/0] ospfv3 1 area 0
[RouterB-GigabitEthernet2/2/0] quit
[RouterB] interface GigabitEthernet 2/2/1
[RouterB-GigabitEthernet2/2/1] ospfv3 1 area 1
[RouterB-GigabitEthernet2/2/1] quit
# Configure Router C.
<RouterC> system-view
[RouterC] ipv6
[RouterC] ospfv3 1
[RouterC-ospfv3-1] router-id 3.3.3.3
[RouterC-ospfv3-1] quit
[RouterC] interface GigabitEthernet 2/2/0
[RouterC-GigabitEthernet2/2/0] ospfv3 1 area 0
[RouterC-GigabitEthernet2/2/0] quit
[RouterC] interface GigabitEthernet 2/2/1
[RouterC-GigabitEthernet2/2/1] ospfv3 1 area 2
[RouterC-GigabitEthernet2/2/1] quit
# Configure Router D.
<RouterD> system-view
[RouterD] ipv6
[RouterD] ospfv3 1
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface GigabitEthernet 2/2/1
[RouterD-GigabitEthernet2/2/1] ospfv3 1 area 2
[RouterD-GigabitEthernet2/2/1] quit
# Display OSPFv3 neighbor information on Router B.
[RouterB] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri
3.3.3.3 1
OSPFv3 Area ID 0.0.0.1 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri
1.1.1.1 1
# Display OSPFv3 neighbor information on Router C.
[RouterC] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
State Dead Time
Full/Backup 00:00:34
State Dead Time
Full/DR 00:00:35
319
Interface Instance ID
GE2/2/0 0
Interface Instance ID
GE2/2/1 0