HPE FlexNetwork HSR6800 Configuration Manual page 257

Figure 76 Network diagram
Configuration procedure
Configure IP addresses for interfaces. (Details not shown.)
1.
Configure static routing between Router A and Router B:
2.
# Configure a default route with the next hop 192.168.212.1 on Router A.
<RouterA> system-view
[RouterA] ip route-static 0.0.0.0 0 192.168.212.1
# Configure static routes to 192.168.64.0/24, 192.168.74.0/24, and 192.168.99.0/24 with the
same next hop 192.168.212.161 on Router B.
<RouterB> system-view
[RouterB] ip route-static 192.168.64.0 18 192.168.212.161
[RouterB] ip route-static 192.168.74.0 24 192.168.212.161
[RouterB] ip route-static 192.168.99.0 24 192.168.212.161
Configure OSPF between Router B and Router C, and configure OSPF on Router B to
3.
redistribute static routes:
# Configure OSPF to advertise the local network, and enable OSPF to redistribute static routes
on Router B.
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 172.17.100.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] import-route static
[RouterB-ospf-1] quit
# Configure OSPF to advertise local networks on Router C.
[RouterC] ospf
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] network 172.17.100.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] network 10.220.2.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Display the IP routing table on Router C.
[RouterC] display ip routing-table
Routing Tables: Public
Destinations : 10 Routes : 10
245