Displaying And Maintaining Mtr - HPE FlexNetwork HSR6800 Configuration Manual

Step
Enter IPv4 address
2.
family view.
Create a topology and
3.
enter topology view.
Specify an ACL for
4.
the topology.
Configure the
5.
maximum number of
routes supported by
the topology.
Return to system
6.
view.
Enter interface view.
7.
Enable a topology on
8.
the interface.

Displaying and maintaining MTR

Task
Display the information
of a topology or all
topologies.
Command
address-family ipv4
multiple-topology topology-name
acl acl-number
routing-table limit number
{ warn-threshold | simply-alert }
quit
interface interface-type
interface-number
multiple-topology topology-name
enable
Command
display multiple-topology
[ topology-name ] [ | { begin | exclude |
include } regular-expression ]
425
Remarks
N/A
Not created by default.
N/A
Optional.
N/A
N/A
Not enabled by default.
Remarks
Available in any view.