Displaying And Maintaining Ripng - HPE FlexNetwork HSR6800 Configuration Manual

Configuration prerequisites
Before you apply an IPsec policy for RIPng, complete following tasks:
•
Create an IPsec proposal.
•
Create an IPsec policy.
For more information about IPsec policy configuration, see Security Configuration Guide.
Configuration procedure
To apply an IPsec policy in a process:
Step
Enter system view.
1.
Enter RIPng view.
2.
Apply an IPsec policy in the
3.
process.
To apply an IPsec policy on an interface:
Step
Enter system view.
1.
Enter interface view.
2.
Apply an IPsec policy on the
3.
interface.

Displaying and maintaining RIPng

Task
Display configuration information
of a RIPng process.
Display routes in the RIPng
database.
Display the routing information of
a specified RIPng process.
Display RIPng interface
information.
Reset a RIPng process.
Clear statistics of a RIPng
process.
Command
system-view
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
enable ipsec-policy policy-name
Command
system-view
interface interface-type
interface-number
ripng ipsec-policy policy-name
Command
display ripng [ process-id |
vpn-instance
vpn-instance-name ] [ | { begin |
exclude | include }
regular-expression ]
display ripng process-id
database [ | { begin | exclude |
include } regular-expression ]
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
display ripng process-id
interface [ interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
reset ripng process-id process
reset ripng process-id statistics
294
Remarks
N/A
N/A
Not configured by default.
Remarks
N/A
N/A
Not configured by default.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.