HPE FlexNetwork HSR6800 Configuration Manual page 28

Summary Count : 2
Static Routing table Status : <Active>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Static Routing table Status : <Inactive>
Summary Count : 1
Destination/Mask
120.1.1.0/24
# Enable BFD debugging. When the link between Router A and Router D fails, Router A can
detect the failure.
<RouterA> debugging bfd event
<RouterA> debugging bfd scm
<RouterA> terminal debugging
%Oct 10 10:18:18:672 2010 RouterA BFD/4/LOG:Sess[1.1.1.9/2.2.2.9, Loop1,Ctrl], Sta:
UP->DOWN, Diag: 1
*Oct 10 10:18:18:672 2010 RouterA BFD/7/EVENT:Send sess-down Msg,
[Src:1.1.1.9,Dst:2.2.2.9,Loop1,Ctrl], instance:0, protocol:STATIC
# Display the static route information again. Router A communicates with Router B over the
static route passing Router C now.
<RouterA> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 2
Static Routing table Status : <Active>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Static Routing table Status : <Inactive>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Proto Pre Cost
Static 60 0
Proto Pre Cost
Static 65 0
Proto Pre Cost
Static 65 0
Proto Pre Cost
Static 60 0
16
NextHop Interface
2.2.2.9 GE2/1/1
NextHop Interface
10.1.1.100 GE2/1/2
NextHop Interface
10.1.1.100 GE2/1/2
NextHop Interface
2.2.2.9