HPE FlexNetwork HSR6800 Configuration Manual page 207

Task
Controlling route
generation
Controlling route
distribution and reception
Controlling BGP path
selection
Tuning and optimizing
BGP networks
Disabling BGP routing
policies from automatically
Configuring the BGP dynamic peer feature
Specifying the source interface for TCP
connections
Injecting a local network
Redistributing IGP routes
Configuring BGP route summarization
Advertising a default route to a peer or peer
group
Configuring BGP route distribution/reception
filtering policies
Enabling BGP and IGP route synchronization
Limiting prefixes received from a peer or peer
group
Configuring BGP route dampening
Specifying a preferred value for routes received
Configuring preferences for BGP routes
Configure the default local preference
Configuring the MED attribute
Configuring the NEXT_HOP attribute
Configuring the AS_PATH attribute
Configuring the BGP keepalive interval and
holdtime
Configuring the interval for sending the same
update
Enabling the BGP ORF capability
Enabling 4-byte AS number suppression
Enabling quick reestablishment of direct EBGP
session
Enabling MD5 authentication for BGP peers
Configuring BGP load balancing
Forbidding session establishment with a peer or
peer group
Configuring GTSM for BGP
Disabling BGP route advertisement to a peer or
peer group
Configuring BGP soft-reset
Configuring BGP community
Configuring a BGP route reflector
195
Remarks
Enterprise recommends
that you configure BGP
peer groups on large scale
BGP networks for easy
configuration and
maintenance.
Optional.
Required.
Use at least one method.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.