HPE FlexNetwork HSR6800 Configuration Manual page 174

State: Up HoldTime: 22s
System Id: 0000.0000.0004
Interface: GigabitEthernet2/1/1
State: Up HoldTime: 22s
# Display information about IS-IS interfaces of Router A.
[RouterA] display isis interface
Interface: GigabitEthernet2/1/1
Id IPV4.State
001 Up
After the DIS priority configuration, you can see Router A is the DIS for Level-1-2, and the
pseudonode is 0000.0000.0001.01.
# Display information about IS-IS neighbors and interfaces of Router C.
[RouterC] display isis peer
System Id: 0000.0000.0001
Interface: GigabitEthernet2/1/1
State: Up HoldTime: 7s
System Id: 0000.0000.0002
Interface: GigabitEthernet2/1/1
State: Up HoldTime: 23s
[RouterC] display isis interface
Interface: GigabitEthernet2/1/1
Id IPV4.State
001 Up
# Display information about IS-IS neighbors and interfaces of Router D.
[RouterD] display isis peer
System Id: 0000.0000.0001
Interface: GigabitEthernet2/1/1
State: Up HoldTime: 7s
System Id: 0000.0000.0002
Interface: GigabitEthernet2/1/1
Type: L2(L1L2)
Type: L2
Interface information for ISIS(1)
---------------------------------
IPV6.State MTU
Down 1497
Peer information for ISIS(1)
----------------------------
Type: L1
Type: L1
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Peer information for ISIS(1)
----------------------------
Type: L2
162
PRI: 64
Circuit Id: 0000.0000.0001.01
PRI: 64
Type DIS
L1/L2 Yes/Yes
Circuit Id: 0000.0000.0001.01
PRI: 100
Circuit Id: 0000.0000.0001.01
PRI: 64
MTU Type DIS
1497 L1/L2 No/No
Circuit Id: 0000.0000.0001.01
PRI: 100
Circuit Id: 0000.0000.0001.01