HPE FlexNetwork HSR6800 Configuration Manual page 264

Figure 79 Network diagram
GE2/1/1
Router F
AS 100
Device
Router A
Router B
Router C
Configuration procedure
Configure IP addresses for interfaces. (Details not shown.)
1.
Configure the BGP confederation:
2.
# Configure Router A.
<RouterA> system-view
[RouterA] bgp 65001
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] confederation id 200
[RouterA-bgp] confederation peer-as 65002 65003
[RouterA-bgp] peer 10.1.1.2 as-number 65002
[RouterA-bgp] peer 10.1.1.2 next-hop-local
[RouterA-bgp] peer 10.1.2.2 as-number 65003
[RouterA-bgp] peer 10.1.2.2 next-hop-local
[RouterA-bgp] quit
# Configure Router B.
<RouterB> system-view
[RouterB] bgp 65002
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] confederation id 200
[RouterB-bgp] confederation peer-as 65001 65003
[RouterB-bgp] peer 10.1.1.1 as-number 65001
[RouterB-bgp] quit
# Configure Router C.
<RouterC> system-view
Router B
GE2/1/1
AS 65002
S2/2/0
GE2/1/4
S2/2/1
GE2/1/1
GE2/1/2
Router A
GE2/1/3
GE2/1/2
Router E
AS 200
Interface IP address
S2/2/1 200.1.1.1/24
GE2/1/1 10.1.2.1/24
GE2/1/2 10.1.3.1/24
GE2/1/3 10.1.4.1/24
GE2/1/4 10.1.1.1/24
GE2/1/1 10.1.1.2/24
GE2/1/1 10.1.2.2/24
Router C
GE2/1/1
AS 65003
GE2/1/2
GE2/1/1
Router D
AS 65001
GE2/1/1
Device
Router D
Router E
Router F
252
Interface IP address
GE2/1/1 10.1.5.1/24
GE2/1/2 10.1.3.2/24
GE2/1/1 10.1.5.2/24
GE2/1/2 10.1.4.2/24
GE2/1/1 9.1.1.1/24
S2/2/0 200.1.1.2/24