HPE FlexNetwork HSR6800 Configuration Manual page 355

[RouterC-Serial2/2/0] quit
[RouterC] interface serial 2/2/1
[RouterC-Serial2/2/1] isis ipv6 enable 1
[RouterC-Serial2/2/1] quit
[RouterC] interface serial 2/2/2
[RouterC-Serial2/2/2] isis ipv6 enable 1
[RouterC-Serial2/2/2] quit
# Configure Router D.
<RouterD> system-view
[RouterD] ipv6
[RouterD] isis 1
[RouterD-isis-1] is-level level-2
[RouterD-isis-1] network-entity 20.0000.0000.0004.00
[RouterD-isis-1] ipv6 enable
[RouterD-isis-1] quit
[RouterD] interface serial 2/2/0
[RouterD-Serial2/2/0] isis ipv6 enable 1
[RouterD-Serial2/2/0] quit
[RouterD] interface gigabitethernet 2/1/1
[RouterD-GigabitEthernet2/1/1] isis ipv6 enable 1
[RouterD-GigabitEthernet2/1/1] quit
Verify the configuration:
3.
# Display the IPv6 IS-IS routing table of Router A.
[RouterA] display isis route ipv6
Destination: ::
Flag : R/-/-
Next Hop : FE80::200:FF:FE0F:4
Destination: 2001:1::
Flag : D/L/-
Next Hop : Direct
Destination: 2001:2::
Flag : R/-/-
Next Hop : FE80::200:FF:FE0F:4
Destination: 2001:3::
Flag : R/-/-
Next Hop : FE80::200:FF:FE0F:4
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
# Display the IPv6 IS-IS routing table of Router B.
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------
343
PrefixLen: 0
Cost : 10
Interface: S2/2/0
PrefixLen: 64
Cost : 10
Interface: S2/2/0
PrefixLen: 64
Cost : 20
Interface: S2/2/0
PrefixLen: 64
Cost : 20
Interface: S2/2/0