HPE FlexNetwork HSR6800 Configuration Manual page 354
Layer 3-ip routing configuration guide
Hide thumbs
Also See for FlexNetwork HSR6800:
- Security command reference (538 pages) ,
- Configuration manual (503 pages) ,
- Command reference manual (153 pages)
Table of Contents
Advertisement
Figure 104 Network diagram
Configuration procedure
Configure IPv6 addresses for interfaces. (Details not shown.)
1.
Configure IPv6 IS-IS:
2.
# Configure Router A.
<RouterA> system-view
[RouterA] ipv6
[RouterA] isis 1
[RouterA-isis-1] is-level level-1
[RouterA-isis-1] network-entity 10.0000.0000.0001.00
[RouterA-isis-1] ipv6 enable
[RouterA-isis-1] quit
[RouterA] interface serial 2/2/0
[RouterA-Serial2/2/0] isis ipv6 enable 1
[RouterA-Serial2/2/0] quit
# Configure Router B.
<RouterB> system-view
[RouterB] ipv6
[RouterB] isis 1
[RouterB-isis-1] is-level level-1
[RouterB-isis-1] network-entity 10.0000.0000.0002.00
[RouterB-isis-1] ipv6 enable
[RouterB-isis-1] quit
[RouterB] interface serial 2/2/0
[RouterB-Serial2/2/0] isis ipv6 enable 1
[RouterB-Serial2/2/0] quit
# Configure Router C.
<RouterC> system-view
[RouterC] ipv6
[RouterC] isis 1
[RouterC-isis-1] network-entity 10.0000.0000.0003.00
[RouterC-isis-1] ipv6 enable
[RouterC-isis-1] quit
[RouterC] interface serial 2/2/0
[RouterC-Serial2/2/0] isis ipv6 enable 1
342
Advertisement
Table of Contents
Troubleshooting
