Configuring Is-Is Mtr - HPE FlexNetwork HSR6800 Configuration Manual
Layer 3-ip routing configuration guide
Hide thumbs
Also See for FlexNetwork HSR6800:
- Security command reference (538 pages) ,
- Configuration manual (503 pages) ,
- Command reference manual (153 pages)
Table of Contents
Advertisement
#Aug
ISIS/4/ADJ_CHANGE:TrapID(1.3.6.1.2.1.138.0.17<isisAdjacencyChange>), ISIS Level-1
Adjencency IN Circuit-983041 State Change.
%Aug
status is DOWN
%Aug
GigabitEthernet2/1/1 is DOWN
%Aug
0000.0000.0002 (GE2/1/1) DOWN, Level-2 Circuit Down.
%Aug
0000.0000.0002 (GE2/1/1) DOWN, Level-2 Adjacency clear.
%Aug
0000.0000.0002 (GE2/1/1) DOWN, Level-1 Circuit Down.
%Aug
0000.0000.0002 (GE2/1/1) DOWN, Level-1 Adjacency clear.
*Aug
ISIS-1-BFD: Success to send msg. Msg type 1 delete session. IfPhyIndex: 5 ,DstIPAddr:
192.168.0.100 , SrcIPAddr:192.168.0.102. NeighborType:Level-2.
*Aug
ISIS-1-BFD: Success to send msg. Msg type 1 delete session. IfPhyIndex: 5 ,DstIPAddr:
192.168.0.100 , SrcIPAddr:192.168.0.102. NeighborType:Level-1.
# Display the BFD information of Router A. Router A has removed its neighbor relationship with
Router B, so no information is output.
<RouterA> display bfd session
# Display route 120.1.1.0/24 on Router A, and you can see that Router A and Router B
communicate through Router C.
<RouterA> display ip routing-table 120.1.1.0 verbose
Routing Table : Public
Summary Count : 2
Destination: 120.1.1.0/24
Protocol: ISIS
Preference: 10
IpPrecedence:
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
Configuring IS-IS MTR
Network requirements
As shown in
traffic, and topology B for video traffic.
8 14:54:05:364 2008 RouterA
8 14:54:05:365 2008 RouterA IFNET/4/LINK UPDOWN: GigabitEthernet2/1/1 link
8 14:54:05:366 2008 RouterA IFNET/4/UPDOWN: Line protocol on the interface
8 14:54:05:367 2008 RouterA ISIS/4/ADJLOG:ISIS-1-ADJCHANGE: Adjacency To
8 14:54:05:367 2008 RouterA ISIS/4/ADJLOG:ISIS-1-ADJCHANGE: Adjacency To
8 14:54:05:368 2008 RouterA ISIS/4/ADJLOG:ISIS-1-ADJCHANGE: Adjacency To
8 14:54:05:369 2008 RouterA ISIS/4/ADJLOG:ISIS-1-ADJCHANGE: Adjacency To
8 14:54:05:370 2008 RouterA ISIS/6/ISIS:
8 14:54:05:370 2008 RouterA ISIS/6/ISIS:
NextHop: 10.1.1.100
State: Active Adv
Tag: 0
Figure
58, use MTR to split the base topology into two topologies, topology A for voice
Process ID: 1
Cost: 4
QosLcId:
Interface: GigabitEthernet2/1/2
BkInterface:
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h58m10s
178
Advertisement
Table of Contents
Troubleshooting
