HPE FlexNetwork HSR6800 Configuration Manual page 313

[RouterB-ipsec-transform-set-tran1] transform esp
[RouterB-ipsec-transform-set-tran1] esp encryption-algorithm des
[RouterB-ipsec-transform-set-tran1] esp authentication-algorithm sha1
[RouterB-ipsec-transform-set-tran1] quit
[RouterB] ipsec policy policy001 10 manual
[RouterB-ipsec-policy-manual-policy001-10] transform-set tran1
[RouterB-ipsec-policy-manual-policy001-10] sa spi outbound esp 12345
[RouterB-ipsec-policy-manual-policy001-10] sa spi inbound esp 12345
[RouterB-ipsec-policy-manual-policy001-10] sa string-key outbound esp abcdefg
[RouterB-ipsec-policy-manual-policy001-10] sa string-key inbound esp abcdefg
[RouterB-ipsec-policy-manual-policy001-10] quit
# On Router C, create an IPsec proposal named tran1, and set the encapsulation mode to
transport mode, the security protocol to ESP, the encryption algorithm to DES, and
authentication algorithm to SHA1. Create an IPsec policy named policy001, specify the
manual mode for it, reference IPsec proposal tran1, set the SPIs of the inbound and outbound
SAs to 12345, and the keys for the inbound and outbound SAs using ESP to abcdefg.
[RouterC] ipsec transform-set tran1
[RouterC-ipsec-transform-set-tran1] encapsulation-mode transport
[RouterC-ipsec-transform-set-tran1] transform esp
[RouterC-ipsec-transform-set-tran1] esp encryption-algorithm des
[RouterC-ipsec-transform-set-tran1] esp authentication-algorithm sha1
[RouterC-ipsec-transform-set-tran1] quit
[RouterC] ipsec policy policy001 10 manual
[RouterC-ipsec-policy-manual-policy001-10] transform-set tran1
[RouterC-ipsec-policy-manual-policy001-10] sa spi outbound esp 12345
[RouterC-ipsec-policy-manual-policy001-10] sa spi inbound esp 12345
[RouterC-ipsec-policy-manual-policy001-10] sa string-key outbound esp abcdefg
[RouterC-ipsec-policy-manual-policy001-10] sa string-key inbound esp abcdefg
[RouterC-ipsec-policy-manual-policy001-10] quit
Apply the IPsec policies in the RIPng process:
4.
# Configure Router A.
[RouterA] ripng 1
[RouterA-ripng-1] enable ipsec-policy policy001
[RouterA-ripng-1] quit
# Configure Router B.
[RouterB] ripng 1
[RouterB-ripng-1] enable ipsec-policy policy001
[RouterB-ripng-1] quit
# Configure Router C.
[RouterC] ripng 1
[RouterC-ripng-1] enable ipsec-policy policy001
[RouterC-ripng-1] quit
Verify the configuration:
5.
RIPng packets between Routers A, B and C are protected by IPsec.
301