Configuring Ospf Route Redistribution - HPE FlexNetwork HSR6800 Configuration Manual

Sum-Net
Sum-Asbr
# Display OSPF routing information on Router D.
[RouterD] display ospf routing
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Total Nets: 5
Intra Area: 2
# Ping 10.4.1.1 to check connectivity.
[RouterD] ping 10.4.1.1
PING 10.4.1.1: 56
Reply from 10.4.1.1: bytes=56 Sequence=2 ttl=253 time=2 ms
Reply from 10.4.1.1: bytes=56 Sequence=2 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=3 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=4 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=5 ttl=253 time=1 ms
--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms

Configuring OSPF route redistribution

Network requirements
•
Enable OSPF on all the routers, and split the AS into three areas.
•
Configure Router A and Router B as ABRs.
•
Configure Router C as an ASBR to redistribute external routes (static routes).
10.1.1.0 10.2.1.1
10.3.1.1 10.2.1.1
OSPF Process 1 with Router ID 10.5.1.1
Routing Tables
Cost
3
1
4
1
2
Inter Area: 3
data bytes, press CTRL_C to break
1069
1069
Type NextHop
Inter 10.3.1.1
Transit 10.3.1.2
Inter 10.3.1.1
Stub 10.5.1.1
Inter 10.3.1.1
ASE: 0 NSSA: 0
91
28 8000000F
28 8000000F
AdvRouter Area
10.3.1.1 0.0.0.2
10.3.1.1 0.0.0.2
10.3.1.1 0.0.0.2
10.5.1.1 0.0.0.2
10.3.1.1 0.0.0.2
1
1